Ladder Safety

First published: September 2, 2026Last verified: September 4, 2026Reviewed by the CertQuestUSA team

TL;DR

Ladder Safety: a 100-question practice bank for the real OSHA Safety & Health standard, 5 full papers of 20 questions each with no repeats, every question citing the real regulation it comes from.

Where these questions come from

Every question in this bank cites a real source -- primarily 29 CFR (90%) and OSHA Letter of Interpretation (10%) of this exam's citations.

Not sure where you stand? Take the free diagnostic — 10 real questions across the exam's domains, no sign-up required, with a domain-by-domain breakdown at the end.

Start diagnostic

5

full papers, no repeats

20

questions per paper

100

questions in the bank

What this exam covers

Climbing & Use Requirements20%
Inspection & Defective Ladders15%
Duty to Have a Ladder or Stairway10%
General Requirements & Load Capacity15%
Setup, Angle & Securing20%
Special Hazards (Electrical, Unstable Bases)10%
Training Requirements10%

5 real sample questions

At minimum, each self-supporting portable ladder must be able to support how many times the maximum intended load applied to it?

A. 2 times

B. 3 times

C. 4 times

D. 5 times

Source: 29 CFR 1926.1053(a)(1)

The requirement that a portable ladder support at least 4 times the maximum intended load applies to which ladders?

A. Only self-supporting ladders

B. Only non-self-supporting ladders

C. Both self-supporting and non-self-supporting portable ladders

D. Only ladders used above 6 feet

Source: 29 CFR 1926.1053(a)(1)

What does "maximum intended load" refer to when determining a ladder’s required load capacity?

A. Only the weight of the ladder itself

B. The total weight of the employee, plus any tools, materials, and equipment carried

C. Only the manufacturer’s shipping weight rating

D. A fixed value of 250 pounds regardless of actual load

Source: 29 CFR 1926.1053(a)(1)

What does 1926.1053 require regarding the general condition of a ladder before it is placed into service?

A. It only needs to look structurally sound from a distance

B. It must be maintained free of oil, grease, and other slipping hazards

C. It only needs to meet load capacity, not surface condition

D. Surface condition is addressed only for metal ladders

Source: 29 CFR 1926.1053(a)(3)

A non-self-supporting ladder (such as a straight or extension ladder) must be placed so that the horizontal distance from the base to the wall is approximately what fraction of the working length of the ladder?

A. One-eighth

B. One-quarter

C. One-half

D. One-third

Source: 29 CFR 1926.1053(b)(5)(i)

Real-world data for this exam

Ladders (Construction)2023-01-01–2026-07-3013,573 citations Ladders (General Industry)2023-01-01–2026-07-301,728 citations

Frequently asked questions

How many questions are on the CertQuestUSA Ladder Safety practice test?

100 questions total, split into 5 full papers of 20 each with no repeats across papers.

What topics does the Ladder Safety test cover?

7 domains, with the heaviest weight on Climbing & Use Requirements (20%), Setup, Angle & Securing (20%), and Inspection & Defective Ladders (15%).

Where do CertQuestUSA's Ladder Safety questions come from?

Primarily 29 CFR (90%) and OSHA Letter of Interpretation (10%) of this bank's citations -- computed directly from this exam's own question sources, not a generic description.

Is there a free diagnostic for Ladder Safety?

Yes -- 10 real questions across the exam's domains, no sign-up required, with a domain-by-domain breakdown at the end.